Ryde Area · 2113
Rendering in Macquarie Park
Taupe render in daylightFrom our own jobs
- RydeLocal council
- Licensed rendererNSW licence 298643C
- 2 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in Macquarie Park?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Guide prices are per m², including GST.
Cement rendering
Guide price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsAbout cement rendering
Acrylic rendering
Guide price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Guide price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Guide price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Guide price $70–$120/m²In Macquarie ParkOn bush fire prone blocks, the cladding system has to suit the block's BAL.
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Guide price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
How it works
From a free quote to a finished wall in Macquarie Park
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render in Macquarie Park
What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.
Bush fire
Bush fire prone edges
Parts of Macquarie Park are mapped bush fire prone land, much of it Category 1 vegetation along the bushland edges. On those lots, exempt re-rendering must be ember-sealed and use equal or better materials (Codes SEPP cl 2.54(c)).
For your render: On bush fire prone land the render or cladding system has to suit the block's bush fire attack level (BAL), with gaps sealed against embers. Polystyrene cladding
Source: NSW Planning Portal, Bush Fire Prone Land map (layer 229)
Bush fire
Polystyrene cladding and BAL
If you are cladding in EPS on a bush fire prone lot, the system needs a tested build-up for your site's bushfire attack level. Unitex's base board reached BAL-29 with an 8 mm base coat and BAL-40 with 16.5 mm.
Source: Unitex Base Board Non-Cavity Technical Manual (Aug 2024), fixings and s2.8
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google
01 / 08
Questions
Rendering in Macquarie Park: your questions
Do you render houses in Macquarie Park?
Yes. We render houses in Macquarie Park, and quotes are free.
How much does rendering cost in Macquarie Park?
As a guide, cement render costs about $34–$69 and acrylic render about $46–$80 per m², including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideDoes bush fire prone land change rendering in Macquarie Park?
Parts of Macquarie Park are mapped bush fire prone land, much of it Category 1 vegetation along the bushland edges.
The full rule and its sourceMacquarie Park and nearby suburbs
Macquarie Park is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.
| Suburb | Direction from Macquarie Park | Council |
|---|---|---|
| West Pymble | North | Ku-ring-gai |
| North Ryde | South | Ryde |
| Marsfield | West | Ryde |
| Killara | North-east | Ku-ring-gai |
| Lindfield | East | Ku-ring-gai |
| Denistone East | South-west | Ryde |
Rendering in Macquarie Park
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.