Service area
Rendering across the Ryde area
White rendered modern facadeFrom our own jobs
- 15 suburbsEach with its own page
- Licensed rendererNSW licence 298643C
- 3 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in the Ryde area?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Guide prices are per m², including GST.
Cement rendering
Guide price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsAbout cement rendering
Acrylic rendering
Guide price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Guide price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Guide price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Guide price $70–$120/m²In the Ryde areaNear the water, the cladding is fixed with stainless steel screws.
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Guide price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
Suburbs we cover across the Ryde area
Each suburb with its own page and postcode.
How it works
From a free quote to a finished wall in the Ryde area
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render
Before you render across the Ryde area
The City of Ryde has only a handful of small heritage conservation areas, such as Tyrell Street in Gladesville, Eastwood House Estate, and Chatham Road and Darvall Estate in Denistone. Outside them, re-rendering or repainting a house that is not a listed item is usually exempt work if it meets the Codes SEPP standards. Ryde's DCP has no general heritage chapter, so listed houses are judged on their heritage impact rather than a fixed face brick rule; where a DCP part does exist, it says original brick should not be painted, bagged or rendered.
Three suburbs cross council lines. Gladesville shares its east side with Hunters Hill, whose minor works letter does not cover painting or rendering unpainted brick or sandstone. Eastwood and Melrose Park both have a Parramatta side, where the Parramatta DCP does not support rendering or painting original face brick on heritage properties.
The Parramatta River and bushland edges are the other factors. Riverside streets in Putney, Tennyson Point, Meadowbank, Melrose Park and Gladesville are within 100 m of salt water, which changes the fixings on polystyrene cladding. Macquarie Park, Marsfield, Denistone and parts of Ryde are mapped bush fire prone.
Rules and site conditions across the Ryde area
Each one from the council plan or data sheet it comes from.
Heritage
No general heritage DCP
City of Ryde DCP 2014 has no general heritage part; most heritage items and conservation areas are assessed under Ryde LEP 2014 clause 5.10. The area parts that exist (Tyrell Street, Eastwood House Estate, Coronation Avenue and Trelawney Street) all advise against painting, bagging or rendering original brick.
Source: City of Ryde, Development Control Plan 2014 (index of parts)
Council
Split suburbs
Gladesville is split with Hunters Hill, and Eastwood and Melrose Park with City of Parramatta, so the address decides which council's process and DCP apply to a re-render.
Coast
Cladding near the river
If you are adding polystyrene cladding within 100 m of the Parramatta River, Unitex requires Class 4 or 316 stainless fixings for its EPS systems.
Source: Unitex Base Board Non-Cavity Technical Manual (Aug 2024), fixings and s2.8
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google
01 / 08
Questions
Rendering in the Ryde area: your questions
Do you render houses in the Ryde area?
Yes. We cover 15 suburbs across the Ryde area, each with its own page. Ask for a free quote.
How much does rendering cost in the Ryde area?
As a guide, cement render costs about $34–$69 and acrylic render about $46–$80 per m², including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideDo I need council approval to render a house in the Ryde area?
City of Ryde DCP 2014 has no general heritage part; most heritage items and conservation areas are assessed under Ryde LEP 2014 clause 5.10.
The full rule and its sourceRendering in the Ryde area
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.