Hills District · 2156
Rendering in Annangrove
Taupe rendered pavilions at duskFrom our own jobs
- The HillsLocal council
- Licensed rendererNSW licence 298643C
- 2 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in Annangrove?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Guide prices are per m², including GST.
Cement rendering
Guide price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsAbout cement rendering
Acrylic rendering
Guide price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Guide price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Guide price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Guide price $70–$120/m²In AnnangroveOn bush fire prone blocks, the cladding system has to suit the block's BAL.
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Guide price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
How it works
From a free quote to a finished wall in Annangrove
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render in Annangrove
What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.
Council
Rural colour rule
Most of Annangrove is zoned RU6 Transition, so The Hills DCP rural section applies: recessive, less reflective earthy tones are preferred.
Source: The Hills DCP 2012, Part B Section 1 Rural (in force 28 June 2024), Building Design & Materials
Bush fire
Bush fire prone acreage
Most of Annangrove is mapped bush fire prone. Unitex tested its polystyrene board build-ups to BAL-29 and BAL-40; the system must suit the block's rating.
For your render: On bush fire prone land the render or cladding system has to suit the block's bush fire attack level (BAL), with gaps sealed against embers. Polystyrene cladding
Source: Unitex Base Board Non-Cavity Technical Manual (Aug 2024), fixings and s2.8
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google
01 / 08
Questions
Rendering in Annangrove: your questions
Do you render houses in Annangrove?
Yes. We render houses in Annangrove, and quotes are free.
How much does rendering cost in Annangrove?
As a guide, cement render costs about $34–$69 and acrylic render about $46–$80 per m², including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideAre there council rules on rendering in Annangrove?
Most of Annangrove is zoned RU6 Transition, so The Hills DCP rural section applies: recessive, less reflective earthy tones are preferred.
The full rule and its sourceAnnangrove and nearby suburbs
Annangrove is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.
| Suburb | Direction from Annangrove | Council |
|---|---|---|
| Kenthurst | North-east | The Hills |
| North Kellyville | South | The Hills |
| Rouse Hill | South-west | Blacktown |
| Beaumont Hills | South | The Hills |
| Box Hill | West | The Hills |
| Gables | North-west | The Hills |
Rendering in Annangrove
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.