Hills District · 2765
Rendering in Gables
Modern two-storey at duskFrom our own jobs
- The HillsLocal council
- Licensed rendererNSW licence 298643C
- 3 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in Gables?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Guide prices are per m², including GST.
Cement rendering
Guide price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsAbout cement rendering
Acrylic rendering
Guide price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Guide price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Guide price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Guide price $70–$120/m²In GablesOn bush fire prone blocks, the cladding system has to suit the block's BAL.
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Guide price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
How it works
From a free quote to a finished wall in Gables
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render in Gables
What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.
Bush fire
Grassland bush fire prone land
Parts of Gables' housing land are mapped bush fire prone, most of it Category 3 grassland. The Gables DCP requires a bush fire assessment against Planning for Bush Fire Protection 2019 with any DA on that land, and exempt re-rendering must still keep embers out.
For your render: On bush fire prone land the render or cladding system has to suit the block's bush fire attack level (BAL), with gaps sealed against embers. Polystyrene cladding
Source: The Hills DCP 2012, Part D Section 17 Gables (in force 4 Sept 2026), 2.12 Bushfire Hazard Management
Council
Zero-lot walls on small lots
On Gables' 300 to 450 square metre lots, the DCP allows a house to sit on one side boundary at ground and upper floor for up to 11 m. Re-rendering or patching that boundary wall means working from the neighbour's side, so access has to be arranged first.
Source: The Hills DCP 2012, Part D Section 17 Gables, Appendix B masterplan controls
Council
Rural transition land
Part of Gables is zoned RU6 Transition. On rural-zoned land The Hills DCP prefers recessive, less reflective earthy tones, and a highly reflective colour has to be justified.
Source: The Hills DCP 2012, Part B Section 1 Rural, Building Design & Materials
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google
01 / 08
Questions
Rendering in Gables: your questions
Do you render houses in Gables?
Yes. We render houses in Gables, and quotes are free.
How much does rendering cost in Gables?
As a guide, cement render costs about $34–$69 and acrylic render about $46–$80 per m², including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideDoes bush fire prone land change rendering in Gables?
Parts of Gables' housing land are mapped bush fire prone, most of it Category 3 grassland.
The full rule and its sourceGables and nearby suburbs
Gables is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.
| Suburb | Direction from Gables | Council |
|---|---|---|
| Box Hill | South | The Hills |
| Annangrove | South-east | The Hills |
| Rouse Hill | South | Blacktown |
| Kenthurst | East | The Hills |
| North Kellyville | South-east | The Hills |
| Beaumont Hills | South | The Hills |
Rendering in Gables
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.