North Shore · 2064
Rendering in Artarmon

Rendered colonnade at duskFrom our own jobs
- WilloughbyLocal council
- Licensed rendererNSW licence 298643C
- 2 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in Artarmon?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Typical prices are per m², including GST.

Cement rendering
Typical price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsIn ArtarmonCouncil and heritage rules can stop original face brick being rendered, so we check your street before quoting.About cement rendering
Acrylic rendering
Typical price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Typical price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Typical price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Typical price $70–$120/m²
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Typical price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
How it works
From a free quote to a finished wall in Artarmon
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render in Artarmon
What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.
Heritage
Artarmon conservation area
Much of Artarmon is in the Artarmon conservation area. Willoughby's development control plan says original face brick must not be rendered, bagged or painted, and asks for the area's unpainted dark face brick to be kept.
For your render: We check your address against these rules before quoting, so the render, finish and colour suit what the council allows there. Cement rendering
Houses
Red-brown brick houses
On these houses the brick is the finish, so render is usually limited to the existing details, matched to them rather than spread over the walls.
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google01 / 08
Questions
Rendering in Artarmon: your questions
How much does house rendering cost in Sydney?
Our typical prices are about $34–$69 per m² for cement render and $46–$80 for acrylic, including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideDo I need council approval to render a house in Artarmon?
Much of Artarmon is in the Artarmon conservation area. Willoughby's development control plan says original face brick must not be rendered, bagged or painted, and asks for the area's unpainted dark face brick to be kept.
The full rule and its sourceHow long does a rendering job take?
As a general guide, rendering a single-storey brick house takes about 3 to 5 days, a two-storey house 5 to 10 days with scaffolding up throughout, and a single storey 5 to 8 days when the old render is stripped first.
Your house will vary with the wall area, the height, the repairs and the weather, and your quote gives the dates. Then allow for curing: new cement render needs about 28 days before it is coated.
How long render needs before paintingArtarmon and nearby suburbs
Artarmon is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.
| Suburb | Direction from Artarmon | Council |
|---|---|---|
| Willoughby | East | Willoughby |
| St Leonards | South-east | Willoughby |
| Naremburn | South-east | Willoughby |
| Chatswood | North | Willoughby |
| Lane Cove | West | Lane Cove |
| Greenwich | South | Lane Cove |
Rendering in Artarmon
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.







