Inner West · 2137
Rendering in Breakfast Point

Taupe rendered pavilions at duskFrom our own jobs
- Canada BayLocal council
- Licensed rendererNSW licence 298643C
- 3 things to checkBefore you render here
- 5.0 on Google9 Google reviews
Which finish suits your house in Breakfast Point?
What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Typical prices are per m², including GST.

Cement rendering
Typical price $34–$69/m²Sand and cement render over brick and block, sponge-floated and ready to paint.Best forSolid brick, concrete block and concrete walls: older brick houses, new masonry builds, front fences and retaining wallsAbout cement rendering
Acrylic rendering
Typical price $46–$80/m²Flexible acrylic systems for Hebel, polystyrene, fibre cement and existing render.Best forHebel (AAC) panels and blocks, polystyrene, fibre cement board, and sound existing render or masonry that needs a more flexible finishAbout acrylic rendering
Other finishes
- White setA hard, smooth set-plaster finish over render inside the house, ready for paint.Typical price $30–$55/m²
- Texture coatingsTexture and membrane coatings over render, brick or fibre cement.Typical price $57–$115/m²
- Polystyrene claddingPanels fixed, meshed, base-coated and rendered as one system.Typical price $70–$120/m²In Breakfast PointNear the water, the cladding is fixed with stainless steel screws.
- Render repairsCracked, drummy or stained render cut out, patched and matched to the wall.Typical price $57–$115/m²
- Brick baggingA thin coat over face brick that keeps the brick pattern, ready for paint.
How it works
From a free quote to a finished wall in Breakfast Point
The owner quotes every job and is there while it is done.
- 01
Ask for a quote
Call, WhatsApp or use the form. Quotes are free.
- 02
Rough estimate
We reply with a rough figure for the job.
- 03
Measure up
A site visit to check the walls and confirm the quote in writing.
- 04
Render
Windows, paths and gardens protected, then the work.
- 05
Clean up
The site cleared and the finish checked with you.
Before you render in Breakfast Point
What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.
Houses
Light pastel walls only
Breakfast Point's precinct controls for single dwellings allow face brick, render or bagging, but wall colours must be light-reflective pastel shades, no wall darker than the traditional 'liver brick', and strongly mottled face brick blends are not permitted. A re-render that needs a DA here should be specified in a light colour from the start.
Source: City of Canada Bay development control plan, K Special Precincts
Houses
White trim on soft-coloured walls
The built form controls for the estate ask for predominant primary walls in light soft colours and white for secondary architectural detail. That suits acrylic texture coats in pale tones and painted mouldings in white.
Coast
Cladding near the river
Breakfast Point's waterfront streets sit within 100 metres of the Parramatta River. For polystyrene cladding on those blocks, Unitex requires Class 4 or 316 stainless steel fixings rather than its standard screws.
Source: Unitex Base Board Non-Cavity Technical Manual, fixing requirements
Sources checked . Council rules change, so we confirm what applies to your house before quoting.
Reviews
What our clients say
Courteous, tidy, protected the area from debris, cleaned up after and a good job
“Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
★★★★★Gregory Williams · “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
★★★★★Stephanie Hammond ·
Reviews from Google, shown as written.
Read every review on Google01 / 08
Questions
Rendering in Breakfast Point: your questions
How much does house rendering cost in Sydney?
Our typical prices are about $34–$69 per m² for cement render and $46–$80 for acrylic, including GST, the same across Sydney. The walls, the access and scaffolding move the price most.
House rendering cost guideDoes salt air change the render system in Breakfast Point?
Breakfast Point's waterfront streets sit within 100 metres of the Parramatta River. For polystyrene cladding on those blocks, Unitex requires Class 4 or 316 stainless steel fixings rather than its standard screws.
The full rule and its sourceHow long does a rendering job take?
As a general guide, rendering a single-storey brick house takes about 3 to 5 days, a two-storey house 5 to 10 days with scaffolding up throughout, and a single storey 5 to 8 days when the old render is stripped first.
Your house will vary with the wall area, the height, the repairs and the weather, and your quote gives the dates. Then allow for curing: new cement render needs about 28 days before it is coated.
How long render needs before paintingBreakfast Point and nearby suburbs
Breakfast Point is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.
| Suburb | Direction from Breakfast Point | Council |
|---|---|---|
| Mortlake | North-west | Canada Bay |
| Cabarita | South-east | Canada Bay |
| Tennyson Point | North-east | Ryde |
| Concord | South | Canada Bay |
| Concord West | West | Canada Bay |
| Putney | North | Ryde |
Rendering in Breakfast Point
Get a free quote
Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.








