Skip to main content

Sydney City · 2011

Rendering in Woolloomooloo

Woolloomooloo's Victorian terraces sit in its heritage area, where face brick stays unrendered, and harbour-side streets need more render upkeep. Cement and acrylic rendering in Woolloomooloo, with a free quote.
Modern two-storey home with light and mid-grey rendered piers and white bands

Grey rendered piers and white bandsFrom our own jobs

Which finish suits your house in Woolloomooloo?

What your walls are made of decides the finish. We also take on render removal, mouldings and commercial jobs. Guide prices are per m², including GST.

How it works

From a free quote to a finished wall in Woolloomooloo

The owner quotes every job and is there while it is done.

  1. 01

    Ask for a quote

    Call, WhatsApp or use the form. Quotes are free.

  2. 02

    Rough estimate

    We reply with a rough figure for the job.

  3. 03

    Measure up

    A site visit to check the walls and confirm the quote in writing.

  4. 04

    Render

    Windows, paths and gardens protected, then the work.

  5. 05

    Clean up

    The site cleared and the finish checked with you.

Before you render in Woolloomooloo

What changes a rendering job here, each from the council plan, heritage register or data sheet it comes from.

  1. Heritage

    Woolloomooloo heritage area

    Most of the suburb is the Woolloomooloo heritage conservation area. The Sydney DCP says existing face brick and stone walls there are not to be rendered or painted.

    For your render: We check your address against these rules before quoting, so the render, finish and colour suit what the council allows there. Cement rendering

    Source: Sydney DCP 2012, Section 3, cl 3.9.7(10)

  2. Houses

    Modest Victorian terraces

    The listing describes surviving rows of modest Victorian terraces from 1850 to 1880, mostly around the edges of the area, alongside hotels and remnant warehouses.

    Source: State Heritage Inventory: Woolloomooloo HCA

  3. Coast

    Harbour-side cleaning

    Woolloomooloo's harbour edge is within 100 m of salt water. Close to the sea, Rockcote asks for its systems to be cleaned down every 12 months and for paintwork and textured finishes to be cleaned more often. Polystyrene cladding needs Class 4 or 316 stainless steel screws, as Unitex specifies.

    Source: Rockcote Maintenance Guide (QHO-MBR014-V007); Unitex Base Board Non-Cavity Technical Manual (Aug 2024), fixings

Sources checked . Council rules change, so we confirm what applies to your house before quoting.

Reviews

What our clients say

5.0★★★★★9 Google reviews ↗
Courteous, tidy, protected the area from debris, cleaned up after and a good job
★★★★★Michael Liberman · · Google
  • “Very professional and so helpful! Good communication and a fair price! Arrived nice and early! The rendering was done very well and looks great. The boys were very careful and made no mess! I have no hesitation in recommending Ali and his workers! I am definitely a very happy customer! Job: rear of house rendering plus a variety of rendering repairs in various places! Thank you so much!”
    ★★★★★Gregory Williams ·
  • “We loved dealing with Ali and his team. They are all lovely and really good renderers. We wanted something a little different (a thickly applied splattered style) in some parts of the house,”bagged” in other areas and smooth render in other parts…all was no problem, and expertly done. All fairly priced too. We would definitely recommend Finishing Touch Rendering. Stephanie and David.”
    ★★★★★Stephanie Hammond ·

Reviews from Google, shown as written.

Read every review on Google

Our work

Houses from our jobs

Finished houses from our own jobs across Sydney.

See our work
Single-storey white rendered home with a wide garage and a timber post at the entry
Single-storey home in white render
Entry of a single-storey home with smooth white rendered walls
Smooth white render at the entry
Modern two-storey home with white and grey render at dusk
Modern two-storey at dusk
Modern two-storey home with white and grey render and a dark tower element at dusk
White and grey render at dusk
Rear of a cream classical two-storey home with white rendered window surrounds and an alfresco
Classical rear elevation with window surrounds
Cream classical two-storey home at dusk with white rendered window surrounds and parapet
Classical facade at dusk, rendered window surrounds
Covered alfresco with an outdoor kitchen and rendered piers
Covered alfresco with rendered piers and walls
Rendered modern two-storey home in cream and grey above a terraced garden at dusk
Two-storey home rendered throughout

01 / 08

Questions

Rendering in Woolloomooloo: your questions

Do you render houses in Woolloomooloo?

Yes. We render houses in Woolloomooloo, and quotes are free.

How much does rendering cost in Woolloomooloo?

As a guide, cement render costs about $34–$69 and acrylic render about $46–$80 per m², including GST, the same across Sydney. The walls, the access and scaffolding move the price most.

House rendering cost guide

Do I need council approval to render a house in Woolloomooloo?

Most of the suburb is the Woolloomooloo heritage conservation area.

The full rule and its source

Woolloomooloo and nearby suburbs

Woolloomooloo is shaded darkest; the lighter suburbs around it are the nearest we cover, each with its own page.

SuburbDirection from WoolloomoolooCouncil
DarlinghurstSouthSydney
Potts PointNorth-eastSydney
Elizabeth BayEastSydney
Rushcutters BaySouth-eastSydney
Sydney CBDWestSydney
PaddingtonSouth-eastWoollahra
All of Sydney City
Map adapted from suburb boundaries © State of New South Wales (Spatial Services, a business unit of the Department of Customer Service NSW), CC BY 4.0

Rendering in Woolloomooloo

Get a free quote

Quotes are free. Tell us about the job for a rough figure; we then visit to measure, check the walls and confirm the quote in writing.

Request a free quote

Quotes are free, and we reply as soon as we can.

Your details

The job

Up to 5 photos.